Is Schluter KERDI Worth It?

Rate this post

Why is there a shortage of Kerdi board?

We are dealing with a raw material shortage as a result of COVID, and we are unable to source part of the materials required for our Kerdi-Board production.

How much is a sheet of Kerdi board?

Waterproof Foam Board Panel. Wichita's everyday low price! $104.89 / piece Size: 96in.

Is the Kerdi system good?

It takes a little longer than the traditional mud shower bed and water-proofing methods, but it is worth it. My shower is water-tight, and the sloped floor drains water perfectly. The finished product looks great. I highly recommend.

Do you need Kerdi over Cementboard?

Kerdi is the vapor barrier, there is no need for anything behind it. Kerdi can even be installed over drywall. Cement board and grout are not water proof, if there's Kerdi no moisture is ever going to be able to get behind it.

Can you paint over Kerdi membrane?

Yes you can paint over Kerdi board but you will need to give it a light coat of joint compound and do a little sanding.

Can you walk on Schluter Ditra?

Pro-Tip: DITRA can be walked on immediately after; there's no need to wait for the mortar to cure.

Can you put Kerdi on plywood?

The Kerdi membrane system requires a 2” overlap at all seams; either with the membrane itself overlapping adjacent piece or with the use of Kerdi-Band tape. Since thin-set mortar works over almost any substrate, the Kerdi system can be used over drywall, plywood, or the various cement boards mentioned above.

What is the best backer board to use in a shower?

Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.

Is The Wedi system worth it?

I have been doing showers for years as a contractor, the Wedi board is the best product for ease of use. If you have leaks then you did not install it correctly. If any contractor uses it on a job without first going to a class or working with another contractor who has used it then they are to blame.

Does Schluter all-set expire?

The shelf life of SET and ALL-SET is two years, while the shelf life for FAST-SET is one year.

Is Schluter all-set good for glass tile?

Schluter recommends unmodified thinset, glass tile (supposedly) requires modified. I called Schluter and the rep said to more or less go with the glass tile mfg's recommendation (if they can even be used on a bonded waterproof membrane) but cure time for modified will be 14 to 60! days.

How much does it cost to install a Schluter system?

Install the four preformed inside corners, two outside corners around the curb, the Kerdi band and Kerdi on the tray 1-2 hours or less. Let it all set up over night. 3-5 hours, install within 24 hours. Installation cost (what I charge) $250.

Can modified thinset be used with KERDI?

Modified thinset mortars aren't recommended for use with Kerdi because they must dry out to gain strength, whereas the membrane inhibits drying, which can lead to unpredictable results. Schluter's recommendation is to use unmodified thinset mortar when installing Kerdi over most shower substrates.

Is Kerdi fix waterproof?

Schluter®-KERDI-FIX is a single component, waterproof sealing and bonding compound with a silane-modified polymer base. KERDI-FIX can be used to waterproof pipe and valve protrusions in the Schluter®- Shower System in conjunction with the Schluter®-KERDI membrane and Schluter®- KERDI-BOARD.

Can Kerdi-board be used on the floor?

The material is equally suitable for creating level substrates in floor renovation projects e.g. residential bathroom installations designed for foot traffic. Schlüter®-KERDI-BOARD is simply cut to size with a utility knife. The gridlines printed on the surface are helpful for neat and quick installation.

How big is Kerdi?

With the available panel thicknesses of 3/16", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2", and 2" (5, 9, 12.5, 15, 19, 25, 38, and 50 mm), KERDI-BOARD allows the installer to prepare and create a broad range of substrates and building elements for the installation of ceramic and natural stone tile that are flat, level, plumb,

How much Kerdi-board do I need?

Does Schluter go over Sheetrock?

Yes. Once you install KERDI over the drywall panels, they will be completely protected from the water and vapor in your tiled shower.

Can you remove tile from Kerdi membrane?

Is DensShield good for showers?

DensShield® Tile Backer is ideal for bathrooms, showers, floors, kitchens and other wet, high humidity areas.

Can you spackle over Kerdi-board?

If partial areas will not be tiled, you can simply cover Schlüter-KERDI-BOARD with a spackling compound or plaster. Abutting seams in the area, inside and outside corners, and exposed edges must be reinforced, for example with Schlüter-KERDI-BOARD-ZSA, and covered with a trowel-applied material.

How do you finish a Kerdi-board to drywall?

How long after laying Ditra can you tile?

How long do I have to wait before I can install tile on the Schluter®-DITRA membrane? Once DITRA has been installed on the substrate, tile can be installed right away. No need to wait for the mortar to cure.

How do you lay Schluter?

Can you tile over Ditra?

Schluter®-DITRA is specifically designed to allow the installation of ceramic and stone tile over any even and load-bearing substrate.

Yes! In fact, it's advised to use this product on drywall in your bathroom before laying tile and other materials. Installing Kerdi on your drywall provides protection against rot, mildew and mold growth. When Kerdi is installed properly, it can serve as an incredibly effective waterproofing layer.

Kerdi is the vapor barrier, there is no need for anything behind it. Kerdi can even be installed over drywall. Cement board and grout are not water proof, if there's Kerdi no moisture is ever going to be able to get behind it.

Leave a Reply

Your email address will not be published.